logo CN
TLX Series Dynamic Tuned Gyro Inclinometer
TLX Series Dynamic Tuned Gyro Inclinometer
TLX Series Dynamic Tuned Gyro Inclinometer, based on aerospace inertial technology, is a kind of small diameter measurement system.It uses the minitype dynamic tuned Gyro and quartz flexible accelerometers as its core sensors, which is typical application of inertial technology in oil field.
Introduction

TLX Series Dynamic Tuned Gyro Inclinometer, based on aerospace inertial technology, is a kind of small diameter measurement system. It uses the minitype dynamic tuned Gyro and quartz flexible accelerometers as its core sensors, which is typical application of inertial technology in oil field. The system is used for repetition measurement of cased well and well-casing damage location. 


Characteristic

Automatic north-seeking;

Without additional measures such as preheating;

Provide the CCL and temperature curve at the same time, continuously operation, easy construction of directional perforation, good scalability such as scalability of muiti-armed caliper;

Little gyro drift,small size;

High precision, high reliability, measuring results not affected by magnetic environment.

Product Types

TLX-38 Series dynamical tuned gyro inclinometers

TLX-45 Series dynamical tuned gyro inclinometers


Parameter

TLX-38 Series dynamical tuned gyro inclinometers

Inclination

range: 0°~70°

accuracy: ±0.1°, 0° ≤ inclination ≤ 70°

Azimuth

range: 0°~360°,

accuracy: ±1.5°( 3° ≤ inclination ≤ 70°)       ±2.0°(1°≤ inclination <3°)

Toolface Angle: Gravity high measurement precision: ±0.3°

Gyro high measurement precision: ±1.0°

Measure Parameters: inclination, azimuth, tool face, operating temperature,  and magnetic directional signal 

Operating temperature: -20℃~+125℃

Maximum pressure: 110Mpa

Shock: 350g,0.5ms

The outer diameter: 38mm

Program environment: Windows XP/VISTA


TLX-45 Series dynamical tuned gyro inclinometers

Inclination

range: 0°~70°

accuracy: ±0.1°,

Azimuth

range: 0°~360°,

accuracy: ±1.5°( 3° ≤ inclination ≤ 70°)          ±2.0°(1°≤ inclination <3°)

Toolface Angle:  Gravity high measurement precision: ±0.5°

Gyro high measurement precision: ±2.0°

Measure Parameters: inclination, azimuth, tool face, operating temperature,  and magnetic directional signal 

Operating temperature: -40℃~+175℃

Maximum pressure: 110Mpa

Shock: 350g,0.5ms

The outer diameter: 45mm

program environment: Windows XP/VISTA